Smartphones have a lot of menu options for you to navigate whenever you need to adjust some settings on certain apps and operating system. And if you don’t know where to go to next, there is always a Home button to press. That’s what the Home button on early iPhones is designed for. Among the physical buttons found on the iPhone, the Home button is likely the most frequently used. That’s why it is also the first button that will soon experience wear and tear symptoms.
Tackled in this post is a pertinent issue in which the iPhone Home button is not working. If you’re still using an iPhone with a physical Home button and here because it’s not working for some reason, then this post might be able to help you. Read on to learn what to do if your iPhone Home button is not responding or not working as it should.
As mentioned earlier, the Home button could stop working due to wear and tear. Like the computer’s mouse and keyboard, the iPhone’s button also has a so-called press/touch limits. If the number of presses or touches has exceeded the maximum number, then that’s when adverse symptoms instigate. At first, you would notice that it is responding intermittently and then, later on, it’s no longer responding at all.
However, it is not always a depreciating hardware component that’s to blame. In fact, there are some instances that the iPhone’s Home button stops working due to some software issues. Such a problem usually occurs among other performance symptoms on an iPhone like unresponsive or frozen iPhone display. These symptoms are often attributed to memory-related issues like when the memory is running low. Bad apps, data corruption, iOS bugs, and malicious software are also among other potential triggers.
In the case where software problems are stopping the Home button from functioning, the hardware might still be able to send the signal but since the software is not responding, nothing happens no matter how you press it. Given that the software-related factors can also be the underlying cause of the problem, it is imperative to try performing some workarounds before rushing to a service center. Highlighted below are a few applicable tweaks and temporary solutions for you to try on.
So from the above information, we can categorize it in two parts that majorly becomes the cause of iPhone home button not responding.
Software problems arise when your iPhone doesn’t respond correctly when you press the Home Button. The hardware could be sending the signal, but if the software isn’t paying attention, nothing happens. When your iPhone’s software becomes corrupted, overloaded, or a helper program (called a process) crashes in the background of your iPhone, your Home button may stop working.
Hardware problems with Home buttons normally fall into one of three categories:
General wear and tear (and gunk)
iPhone 5 Home button in some cases, and especially where iPhones are used in dusty or dirty environments, the Home button can become less sensitive to touch. Don’t assume this is what’s going on if your Home button works intermittently (some of the time)—software problems cause this too. In my experience, the wear and tear issue affects pre-Touch ID iPhones (iPhone 5 and earlier) more than the current models.
The Home button becomes physically dislodged
Smash! Your Home button isn’t where it used to be, or it’s a little “off-kilter”—this is relatively rare.
One of the cables that connect the Home button to the logic board is damaged
The Home button is substantially attached to your iPhone’s display, and two cables carry the Home button signal to the logic board. One cable runs run through the top of the display and connects at the top of the logic board, and the other cable connects to the logic board underneath the Home button on the left. If your iPhone’s screen or display was damaged or got wet, one of the Home button cables or connectors may have been damaged too.
It is a fact that you never really realize how much your life depends on one button, that is until it stops working and getting access to your phone has now become a big problem. But don’t panic! The great news is, this is an issue that can easily be solved by yourself. We have composed tips from our experts on how to fix your iPhone home button not working, but if it still doesn’t come back to life, it might be time to visit us in-store! Some of the causes of this can be that over the lifetime of having your phone, it has attracted; dirt, moisture, and in general, it has been overused!
Let’s see how to fix iPhone Home Button not working problem.
1. Calibration and restore
This one is one of the most reliable tricks, especially for fixing the Home button delays and it will make it more responsive. For you to calibrate your iPhone device, try doing the following steps below.
- Open any of default application on your iPhone mobile
- Press and hold the power button until you see the “slide to power off” message on your screen
- Press and hold your iPhone home button until you go back to the main screen
- After that, the default app that you opened will be closed. Now go ahead and try using your iPhone Home button if it is working.
If the home button is not working, you should not get panic and rush to your nearest Apple Store. It could be some minor problems that made your home button stop working, such as dust. And in this situation, first, you need to check whether there is too much dirt for the home button to work normally. The button may be clogged with dirt, sweat, and moisture because of the sticky hands. You should try to remove the possible dust deposited around the Home button.
To perform the cleaning, it is advisable to make use of isopropyl alcohol with 99% concentration.
- The first step is to switch off the iOS device and apply 2-3 drops of isopropyl alcohol with a cotton swab.
- After that, remove all dirt from the home button with the help of cotton swab.
The purpose of using alcohol is to melt the dirt pollutants or any kind of grime. The cotton will primarily act as a remover and clean everything. We would suggest you wait for at least 30 minutes before you start to work with the iPhone, for you can’t turn on an iPhone while it’s still wet partly. Afterward, make sure to verify whether the home button of your iPhone or iPad is working or not.
3. Reboot your iPhone
We’re heading into the software troubleshooting phase of the tutorial. As we discussed, your Home button may not work if your iPhone’s software doesn’t react the way it should when you press the Home button. If your iPhone has been responding very slow apps have been crashing, or your Home button stuck or stopped working after you upgraded to a new version of iOS, a software problem may be the reason why your Home button won’t work.
The first (and least invasive) software troubleshooting step is to turn your iPhone off and back on again. If you already rebooted your iPhone to turn on AssistiveTouch and that didn’t fix your Home button, just move on.
When you switch off your iPhone, all the little processes that keep your iPhone running, one of which processes “events” like a Home button press, are forced to exit. When you again turn on your iPhone, those programs start fresh again, and sometimes that’s enough to solve a minor software glitch.
Another method is to fix the broken home button with Tenorshare ReiBoot software. It is one of the best iOS System Recovery for some of the most common iOS issues including a device stuck on the Apple Logo or a device stuck in recovery mode.
- 1-click to Enter/Exit Recovery Mode Free
- Repair 50+ iOS system problems like stuck on Apple logo, the screen won’t turn on, recovery mode loop, etc.
- Fix your iPhone if it’s freezing or tolerating problems you can’t identify.
- Without Data Loss it recovers your iOS to normal.
- Fully compatible with the newest iPhone XS/XS Max/XR/iPad Pro & iOS 12.3/iPadOS
Download Tenorshare ReiBoot to either on your Windows or Mac. Install the tool and launch it. Then attach your iPhone to PC with a USB cable.
After successfully connecting, just tap on “Enter Recovery Mode” button and wait for the process to finish. Then click “Exit Recovery Mode” option to exit iPhone recovery mode and to move on the next step.
If this mode unable to solve your problem, you might as well click “Fix All iOS Stuck” to repair the operating system.
A general rule of thumb: If your Home button stopped working after your iPhone was physically damaged or got wet, your iPhone probably needs to be repaired—but not always. If it has gradually gotten worse over time or no major iPhone life event happened before it stopped working, we may be able to fix it at home.
So if any of the above tips didn’t work and your problem isn’t solved then you can try these alternative tips described below.
- Customize the click speed
- Test The Home Button Itself
- Inspect Your iPhone For Damage
- Back-Up And Restore Your iPhone And Test Again
- Repairing A Broken Home Button
- Test all the Spots on your Home Button
- Replace Home Button
- Approach the Apple Repair Store
- Connector Modification
- Remove the protective cover or iPhone cases
- Upgrade to the latest iPhone
- Service/iPhone repair
No doubt, the iPhone home button not working problem will cause worries if you are fully dependent upon your iPhone, as you need the home button to perform several tasks. However, you can try out the above-mentioned tips if the iPhone Home button fails to respond. In this article, you can find all the possible hacks to resolve the issue of the home button. Did you find any new way to resolve the iPhone home button not working issue? Please share with us in the comments below.