The situation would definitely be frustrating when you have a good data bundle but your web pages are unable to load. A good internet connection might be the first thing that we seek in our daily life. The data connection may not be available due to many reasons – sometimes, it can be a Mobile network issue or sometimes, it happens due to an issue with the Mobile phone.
If you are the one who is passing through the same condition and looking for a potential solution to fix the Android phone mobile data not working issue, that is the exact post you are looking for. In this article, we will cover some of the key solutions that can resolve your data connection problem on Android within a few minutes.
Part 1. Reasons Why Data Connection Problems Happen on Android
There may be certainly known and unknown reasons that cause the data connection problems in Android mobile. The below-described are some of the possible reasons:
- Wak signal strength.
- Never turned off your device for a long time.
- LTE os not activated to get the faster data speed.
- Forget to turn on the data connection.
- The data connection may be limited up to a specific amount.
- The sim card is in poor condition or misplaced from its position.
Part 2. Solutions to Fix Data Connection Problems in Android Mobile
Here are some quick yet effective ways using which you can fix Android phone mobile data not working.
Solution 1. Check If You Have Turned Your Mobile Data Is Turned On And The Signal Is Right
The first thing you should try is to check if you have turned on the mobile data or not. It is possible that you may be thinking that you have turned on the mobile data and you didn’t.
There could be two ways to check either the data connection is enabled on not.
The quickest way to check is, swipe the screen from the top bar and see if the Data is on.
The other good way is to check it through settings. And it isn’t turned on from here, click on the Toggle button.
Solution 2. Reset Your Android Phone’s Network Connection
A network reset might be the strongest fix that you can try in case if the data connection is turned on but not working on Android. There are millions of people who use the same network at the same time so it may be due to network glitch.
Make sure you have chosen the right network. If there was the wrong network chosen then change the network to the right one. If already the right is chosen then Reset the Network.
You can simply perform a network reset on Android by following these easy instructions.
- Open settings from your Android menu.
- Look for connections, it can be found at the top of the settings.
- Choose the Mobile Network option among various available connections.
- Here, you will also see the Access points option, click on it.
- From the top-right, click on the three dots and choose the Reset Networks to Default option.
Solution 4. Remove The SIM Card And Reinsert It Back
Sometimes, the inserted sims can be a little misplaced due to abnormal use of the mobile phone. If you are troubleshooting the Network Error issue and unable to use Data Network, remove the sim and insert it back to the sim port and Reboot the device.
Solution 5. Reset Your APNs
APNs are basically short name to Access point Names. APNs are used to connect your mobile device with the network service provider (whatever you are using) to run the Internet on it. It automatically establishes all other important settings and sets the IP over the network so that the internet can run smoothly.
However, we all know the network service providers communicates with millions of mobile network at once so it might possible that something went wrong while establishing the internet connection. Well, that’s not a problem at all. You can manually change these APNs settings or reset them to default. Let’s see how to reset your APNs.
- Tap on Settings from your Android menu
- Look for Connections options within the settings
- Choose the Mobile Network feature among different available connections.
- Here, you will also find the Access points option as well, tap on it.
- The available mobile connections will be displayed in front of you. Choose the right Access point and click on it.
- All the network settings will be shown to you, here, you can manually change or reset the APNs settings.
Solution 6. Set APN Protocol to iPv4/IPv6
An issue with APN protocol might be the reason that you can’t access the internet even data connection is turned on. Usually, the Android operating systems do not facilitate its users with this option but nowadays, all the modern mobile phones have this feature and you can check it whether there is an issue with the internet.
Typically, the protocol is by default set to the iPv4/iPv5 but if it remained empty or a lower protocol is chosen, you can change it through settings.
To make sure your device is using the iPv4/iPv6 APN protocol, follow these instructions.
Solution 7. Do You Have a Mobile Data Limit?
It happens when you set a data usage limit and then forget. The internet may not be available to you when data reach its limit. Check your internet settings and extend the usage limit if you have limited the data.
Solution 8. Turn Airplane Mode On & Off
We are aware of the fact that a network is loaded with users and it is possible that due to a network glitch or traffic over a network more than expected can cause internet issues.
Trying turning on & off the airplane mode can solve the problem so you must try this little fix.
Solution 9. Factory Reset Your Android Mobile
If all the above-described methods do not bring any effective results then you may try a factory reset. Resetting your Android device to its factory settings is also a good approach.
Find the reset option on your Android and do the factory reset to get rid of the data connection not working issue.
Solution 10. Repair Android System with ReiBoot for Android(Safe Way)
ReiBoot for Android is the handiest and powerful approach if you are troubleshooting any kind of issue on your Android mobile phone. If all the above-mentioned techniques go fail and you do not want to factory reset your Android then Reiboot for Android is the most robust solution to solve the data connection problem on Android mobile phone. It is one of the best Android system repair tools that can find and resolve the error with a single click.
Let’s see how to fix the data connection not working on Android phones using Tenorshare ReiBoot for Android repair tool.
- Only a single click to enter and exit the download mode.
- Efficiently resolve a bunch of Android issues including slow, hung, stuck and other issues.
- Above 600+ Android devices are supported including the latest models of different OSs.
- Easy to understand and intuitive GUI.
- Quickest Android Repair Software.
How it works
You can download the ReiBoot for Android from its official website. Install and launch the software on your operating system.
Simply click “Repair Now” to get started with the repair.
Select the correct device information to avoid an error in the next steps.
It will download the firmware package for your Android cell phone which is best compatible with your device.
Click on the “Repair Now” button after the firmware package is downloaded.
Click “Continue” if you have read the instructions.
Connect your Android device to it and follow the below pattern to enter into the download mode if your device has the home button.
Follow this entrance method if you are using one of the latest Android cell phones.
After the phone is entered into the download mode, ReiBoot will start repairing your Android phone.
Remove the device and check. Hopefully, the internet problem would be resolved.
Although, we have described all the possible methods and there is no one else except these. But if you have any other potential way to fix the data connection problem on Android cell phones, please share it with us and we will love to include it in our next guide. Leave the comments if you know of a substantial fix that wasn’t included in this article.